Working condition
| Pressure Rating | CLASS 1500 |
| Nominal Size | NPS 12"–24" |
| Sealing Standard | API 598 / FCI 70-2 Class VI |
| Applicable Media | syngas, ammonia |
| Temperature Range | -50°C to +45°C |
| Operation Method | Pneumatic |
Pain Points and Proposal
1. Jam: Under high-pressure gas conditions, metal to metal "bite" (micro-welding phenomenon) easily occurs between parts; These phenomena occur on these parts: ball, seat, bearings, bushings, stem, bottom shaft, etc.
2. Internal Leakage:The valve passed factory accetance pressure testing but leakage occurs while running online.
3. After long-term using under high pressure alternating, the body seal gasket is prone to leakage.
1.Anti-bite alloy coating. Strongly rigid valve seat design to prevent jamming caused by valve seat distortion.
2.Zero leakage under long-term pressure holding.
3.Quantitative compression technology to ensure that the torque fluctuation of each product does not exceed 20%
4. Interchangeable of ball seats; stable torque ensures long service life
Reference
-
Henan Jindadi
Process: Soda Ash Process
Size: DN15 to DN600
Pressure Rating: CLASS 900 to 1500lb
Temperature: -29 to 180°C
Fluid: Ammonia Gas, Liquid Ammonia
Raw material: A105, F304, F316L